Untitled Document
HOME > Product Introduction > Polyester Base film > Physical Properties
1) Product name : Excell
2) Composition : biaxially oriented polyester film
3) Manufacturer : Toray Saehan Inc.
1) Physical hazard : none
2) Potential health effects : none
1) Content not hazardous
2) Potential health effects : none
1) Melting point : 255~265C (491~477F)
2) Boiling point : -
3) Specific heat : 1.34 KJ/Kg (25C)
4) Heat of combustion : 23.5 MJ/Kg
5) Steam pressure (mmHg, 20C) : -
6) Steam density (air=1) : -
7) Solubility (water) : non soluble
8) pH : -
9) Density : 1.40 g/cm3
10) Form : film
11) Odor : odorless
12) Color : transparent, translucent, white, yellow
1) Flash ignition temperature : 346~399C (655~750F)
2) Self ignition temperature : -
3) STP : -
     Extinguishing media : water, CO2, foam, halon extinguisher
5) Special protective gear : use appropriate self contained breathing apparatus
6) Unusual fire, explosion hazards : flammable and when flammable liquid is added, may lead to fire.
                                                                     Fire will self-extinguish
1) Stability : stable under normal condition
2) Materials to avoid : -
3) Hazardous decomposition products : CO2, CO, terephthalic acid, aldehyde
4) Hazardous polymerization : will not occur
1) General : This information is based upon chemical composition analysis and technical information believed to
                        be reliable
2) Ingestion : The film is not likely to be hazardous by ingestion
3) Eye contact : The film is not likely to be hazardous by eye contact
4) Skin contact : The film is not likely to be hazardous by skin contact
5) Skin absorption : The film is not likely to be absorbed into skin
6) Inhalation : No specific intervention is indicated as the compound is not likely to be hazardous by inhalation
7) Over exposure : Because of the form of the material, it is unlikely to be exposed to carbon black component.
8) First aid measures :
    A.Skin : Wash skin with soap and plenty of water. Consult physician when skin turns red or itchy. If molten
                    polymer contacts skin, cool rapidly with cold water and obtain medical attention for thermal burns.
    B.Eye : Wash eyes with water for 15 minutes. Consult a physician.
    C.Ingestion : Drink a couple of cups of water. Consult a physician upon gastrointestinal symptoms
    D.Inhalation : If exposed to fumes, move to fresh air. Consult a physician if symptoms persist.
1) When unwound during de-boxing : separately store as recycled
2) Process in compliance with the federal and provincial regulations
1) Respiratory protection : not required
2) Ventilation : -
3) Protective clothing : not required
4) Eye protection : -
5) Other protection : not required
 
Above information is all true but should only be used as a guideline and does not relate to all possible uses.
Toray Saehan Inc. shall not be responsible for any damage caused by the above product.